Cayin MT-35MK3

€ 1,698.00

The Cayin MT-35MK3 is an integrated tube amplifier with Bluetooth and comes in silver. It has 2 x 36 W per channel and 4 inputs. The voltage can be adjusted individually for each tube using a trimmer, while the central illuminated wheel serves as a simple indicator for optimal settings. There is also a built-in Bluetooth receiver for direct wireless playback of digital signals. With Bluetooth 5.1 and high-quality codecs such as AAC, aptX HD and LDAC, high quality is guaranteed, even when streaming. The full-size headphone output on the front panel drives standard headphones with impedances from 16 to 300 ohms. The central illuminated VU meter not only gives the MT-35 Mk3 a classic look and displays the current power level, but also serves to optimize the bias voltage for each individual amplification tube.

Availability: In stock

The Cayin MT-35 MK3 is suitable for everyday use. With 36 watts of power per channel, a Bluetooth receiver, a headphone output and a VU meter, it has everything a modern amplifier needs. The Cayin MT-35 MK3 combines the finest tube sounds with everyday performance in a uniquely affordable way: In ultra-linear mode, its four output tubes deliver an incredible two times 36 watts of power. The amplification itself is carried out in a particularly efficient push-pull class A/B mode for powerful dynamics from the four EL34 tubes. The output transformers, which are equally crucial for the sound, were specially developed for the MT-35 Mk3 circuit. A high-quality Alps potentiometer ensures precise, channel-identical volume control.

An easy-to-install protective cage is included. It reliably prevents accidental contact with the tubes and allows a clear view of the seven illuminated glass bulbs. Equipped with four EL34 amplifier tubes, it generates sufficient power for many commercially available speakers. Different taps on the specially developed, wideband output transformer with dedicated 4- or 8-ohm terminals allow optimal adaptation to high or low impedance speakers.

Specifications:
Frequency range: 8 Hz to 60 kHz (-3 dB)
Output power (RMS) at 4 and 8 ohms: 36 W + 36 W ultralinear, 18 W + 18 W triode.
Total Harmonic Distortion (THD): 0.25% (1 kHz)
Signal to noise ratio: 93 dB
Input impedance: 100 kOhm
Input sensitivity: 300 mV
Circuit: Class A/B
Tubes: 1x 12AX7, 2x 12AU7, 4x EL34
Headphone output: 16 Ω~300 Ω
Inputs: 3 x Line-in, Bluetooth

Bluetooth:
Bluetooth version: V5.1
Processor: QCC5125
Range: 10 meters
Bluetooth standards: LDAC, aptX HD, aptX LL, aptX, AAC, MP3, SBC
DAC chipset: ES9018K2M SABRE32
Circuit: Class A/B
Speaker Impedance Resistance: 4 ohms, 8 ohms
Mains voltage: 230 V AC/50 Hz
Dimensions (W x D x H): 326 mm x 278 mm x 184 mm
Weight: 13.5 kg